- Centroid M400 control with 15” Touch Screen LCD
- 7.5 HP spindle motor, CAT40 spindle taper
- Programmable 50 to 8,000 rpm spindle speed
- Hardened & Ground with Turcite-B coating guide way
- Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% laser tested for positioning accuracy & repeatability
- Box ways design on Y & Z axis to provide maximum rigidity & stability
- Standard way covers on all three axes
- Tool box & tools
- Coolant system
- Central lubrication system
- Built-in Quartz work light
- Portable hand wheel
Specification | |
Table | 13.7" x 50" |
Longitudinal travel (X-axis) | 31.5" |
Cross travel (Y-axis) | 15.7" |
Vertical travel (Z axis) | 17.7" |
Spindle nose to table top (D) | 4.7" to 22.4" |
Spindle center to column front surface | 17.7" |
Spindle taper | CAT40 |
Spindle speed | 60 to 8000 rpm |
Load capacity | 880 lbs |
Transmission of spindle & motor | Belt |
Motor | |
Spindle motor/max torque | 7.5 HP / 5.5 kW |
Servo motors on XYZ | 1 kw - AC |
Coolant pump | 1/8 HP |
Lubrication pump | 150W |
Power requirement | 15 KVA, 3 Phase 208V to 230V (Max) |
Feed Rate | |
Rapid feed rate | X/Y/Z: 250 ipm AC |
Cutting feed rate | 1 - 120 ipm |
Automatic Tool Changer | |
No, of tools | N/A |
Max tool diameter | 3.5" |
Max tool weight | 15 lbs |
Dimension & Weight | |
Length x width x height | 110.6" x 94.5" x 96.8" |
Net weight | 5500 lbs |