- Centroid T400 control with 15” Touch Screen LCD
- 10 HP Spindle Motor, D1-8, 3 3/8” through hole spindle
- Max 1,800 rpm spindle speed with 3 speed gear box
- Hardened & ground with Turcite-B coating guide way
- C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% Laser tested for positioning accuracy & repeatability
- Massive one piece casting construction for maximum cutting performance
- Rugged cast iron design to provide maximum rigidity & stability
- Tool box & tools
- Coolant system
- Central lubrication system
- Built-in Quartz work light
- Dual Hand Wheel for manual operation
Specification | |
Height of center | 9" |
Swing over bed | 18" |
Swing over cross slide | 9" |
Distance between centers | 39.4" |
Width of bed ways | 11.8" |
Max. size cutting tool | 1" |
Spindle | |
Spindle nose mounting | A1-6 or D1-6 |
Spindle bore | 2 1/8" |
Taper of spindle bore | M.T.#6 (Sleeve M.T.#4) |
Range of spindle speeds | L: 60 to 600 RPM H: 601-3000 RPM |
Longitudinal travel (Z-axis) | 32 |
Cross slide travel (X-axis) | 11" |
Rapid travel/ Cutting feed rate | 270 / 120 ipm |
Motor | |
Spindle motor/max torque | 7.5 HP |
Tailstock | |
Tailstock quill diameter | 2 1/4" |
Tailstock quill taper | M.T.#4 |
Tailstock quill travel | 6 1/2" |
Dimension & Weight | |
Length x width x height | 96" x 74" x 87" |
Net weight | 4400 lbs |