- Mitsubishi PLC 3-Axis controller (TD-2)
- Mitsubishi PLC 3-Axis controller (TD-3)
- 19" TFT monitor
- ± 95º any angle wheel dressing
- BT40 spindle taper
- CBN spindle motor 2 HP
- 100~2500 rpm CBN spindle speed
- Grinding wheel workhead and swing workhead
- Wheel grinding dress and check
- CNC hand wheel (MPG)
CBN Grinding Wheel | |
---|---|
Spindle taper | BT40 |
CBN max. diameter | Ø9" |
CBN min. diameter | Ø5" |
CBN spindle speed | 100~2500 rpm |
CBN spindle motor | 2 HP (1.5 kW) |
CBN longitudinal movement(W) | 11" |
CBN cross movement(U) | 5.5" |
Grinding Wheel | |
Grinding wheel diameter | Ø8"x0.75"t |
Grinding wheel speed | 200~3500 rpm |
Grinding wheel motor | 1 HP (0.75kW) |
Grinding wheel X axis travel | 3.93" Servo |
Grinding wheel Z axis travel | 0.8"~3.1" Servo |
Grinding wheel Z axis swing time | 0~1965 inch/min |
Grinding wheel B axis auto rotation | None (TD-2) |
Servo (TD-3) | |
Grinding wheel B axis rotation angle | ± 95º |
Dimension | |
Floor space | 60" x 78" x 71" |
Weight | 3860 lbs (1750 kgs) |
Standard Accessories | ||
---|---|---|
Work lamp 2 sets | Spare belt for spindle drive | Leveling bolts & block |
Dress grinding wheel flange | Additional diamond truing tool | Coolant hoses & valves |
Tool box w/ adjusting tool | 19" TFT monitor | Linear scale device (U,W) |
Dry & wet coolant tank | Semi splash guard | CNC hand wheel (MPG) |
CCD test bar | Wheel dresser | CCD camera system w/ magnification 5X~50X (manual) |