- Centroid T400 control with 15” Touch Screen LCD
- 5 HP Spindle Motor, D1-4, 1 1/2” through hole spindle
- Max 2,000 rpm spindle speed with 3 speed gear box
- Hardened & ground with Turcite-B coating guide way
- C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% Laser tested for positioning accuracy & repeatability
- Massive one piece casting construction for maximum cutting performance
- Rugged cast iron design to provide maximum rigidity & stability
- Tool box & tools
- Coolant system
- Central lubrication system
- Built-in Quartz work light
- Dual Hand Wheel for manual operation
Specification | |
Height of center | 7" |
Swing over bed | 14" |
Swing over cross slide | 8.5" |
Distance between centers | 40" |
Width of bed ways | 8.5" |
Max. size cutting tool | 3/4" |
Spindle | |
Spindle nose mounting | D1-4 |
Spindle bore | 1 1/2" |
Taper of spindle bore | M.T.#5 (Sleeve M.T.#3) |
Range of spindle speeds | 50 to 2000 RPM |
Longitudinal travel (Z-axis) | 31.49" |
Cross slide travel (X-axis) | 7.48" |
Rapid travel/ Cutting feed rate | 240 / 120 ipm |
Motor | |
Spindle motor/max torque | 5 HP |
Tailstock | |
Tailstock quill diameter | 1 3/4" |
Tailstock quill taper | M.T.#3 |
Tailstock quill travel | 4 3/4" |
Dimension & Weight | |
Length x width x height | 96" x 74" x 77" |
Net weight | 2400 lbs |