- Centroid T400i control with 15” LCD
- 7.5 HP Spindle Motor, A2-5, 1.8" through hole spindle
- Rigid cartridge spindle max 5,000 rpm spindle speed
- K45G(Gang tooling) K45T(8 T turret) K45GT (Gang tooling plus turret)
- Precision linear guide ways on X and Z axis
- C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting
- One piece bed and base made by FC30 Meehanite Casting with annealed & stress relieved for long term reliability
- 100% Laser tested for positioning accuracy & repeatability
- Massive one piece casting construction for maximum cutting performance
- 6” hydraulic chuck and 8 position turret with 4 pcs set gang tools standard
- Tool box & tools
- Fully enclosure with electrically interlocked
- Coolant system
- Central lubrication system
- Built-in Quartz work light
Specification | |
Max turning diameter | 6.7" |
Swing over saddle | 13" |
Bed | 30 degree Slant bed |
Guide way | Linear on X and Z axis |
Hydraulic chuck size | 6" |
Spindle | |
Spindle nose mounting | STD: A2-5 |
Range of spindle speeds | 50 to 5000 RPM |
Longitudinal travel (Z-axis) | 7.1" |
Cross slide travel (X-axis) | 10" |
Rapid travel/ Cutting feed rate | 400 / 120 ipm |
Max. bar capacity | 1.8" |
Hydraulic | 8 position |
I.D. cutting tool (boring) | 1" |
O.D. cutting (turning) | 3/4" |
Motor | |
Spindle motor/max torque | 7.5 HP |
Dimension & Weight | |
Length x width x height | 80"x53"x58" |
Net weight | 6400 lbs |