Electronic Vari- Speed Head
Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Electronic Vari-Speed Head 3HP spindle motor, R8 / NT30 spindle taper.
Digital output 70-5000rpm spindle speed with Hi/Lo Gears.
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in Halogen Work Light.
One shot lubrication system.
Easy Tap Function.
Specification | |
Table | 9" x 49" |
Longitudinal travel (X-axis) | 30" |
Cross travel (Y-axis) | 12" |
Knee travel (manual) | 16" |
Quill travel | 5" |
Quill diameter | 3.38" |
Spindle nose to table top (D) | 1.96" to 17.9" |
Spindle taper | R8 / NT30 |
Spindle speed | 70 to 5000 pm ( Lo / Hi gears ) |
Load capacity | 660 Lbs |
Transmission of spindle & motor | Timing belt |
Head Swivel (left/right) | +90 / -90 Degree |
Head tile (front/back) | +45 / - 45 Degree |
Motor | |
Spindle motor/max torque | 3 Hp |
Coolant pump | 1/8 Hp |
Lubrication pump | One Shot |
Power requirement | 4 KVA 3 Phase 208 - 230 V (max ) |
Dimension & Weight | |
Air Requirement | With Optional . power draw bar 90-100 psi |
Oil Way Requirement | Mobil Vectra #2 / Way Oil # 2 |
Floor space (L x W x H) | 64" x 75" x 85" |
Net weight | 2640 Lbs |