Specification:
- 3HP Spindle Motor, R8 Spindle Taper
- 4,200 rpm spindle speed with HI-LO gear
- Hardened & Ground with turcite-B coating guide way
- Double nut precision acme lead screws for high accuracy and long lasting
- FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
- Anti rust chrome quill
- Standard way cover on three axes
- Tool box & Tools
- Precision APEC class7 spindle bearing to ensure spindle runout within 0.0002
- One shot lubrication system
- Built-in Quartz work light
STANDARD ACCESSORIES:
| Table: |
9” x 49” |
| Longitudinal travel (X axis ): |
36” |
| Cross travel: |
12” |
| Z axis travel quill: |
5” |
| Knee travel (manual): |
16” |
| Quill diameter: |
3.375” (86 mm) |
| Spindle nose to table top (D): |
0.75”-16.75” (20 - 426mm) |
| Load capacity: |
600 lb |
| Spindle taper: |
R8 |
| Spindle Speed (r. p.m.): |
70 to 4200 rpm with Hi/Lo gear |
| Transmission of spindle & motor: |
Timing Belt |
| Spindle center to column front surface: |
6.875” to 27.875” (175 - 707mm) |
| Head: |
|
| Swivel (left/right) : |
90 degree |
| Tile (front/back): |
45 degree |
| Motor: |
|
| Spindle motor/max torque: |
3HP (Std.) |
| KVA rating: |
4KVA, 15amps |
| Coolant pump (optional) |
1/8 Hp |
| Lubrication pump: |
one shot |
| Power requirement: |
4 KVA, 3 Phase 220 or 440 voltage |
| Length X Width X Height (LXWXH): |
101” x 70” x 82” |
|
Net Weight:
|
2,200 lbs |
Additional Accessories information:
| Power requirement |
4 KVA 3 phase 220V or 440 V |
| Air requirement |
With opt. power draw bar 90 - 100 psi |
| Type of oil for Way oil / pneumatic oil |
Mobil Vactra #2 / Air tool oil |
| Coolant capacity |
7 Gallons |
| Tools & box |
Align power feed |
Sino 2axes digital read out system |
| Operation manual |
R8 collect holder |
Halogen work light |
| Draw bar |
One shot lube system |
|
| Way cover |
|
|
