CNC KNEE MILL3VK Inverter Rigid head w-moveable ram
MACHINE FEATURES
|
* Centroid M400S or M39 3 axis Control
* 3HP Spindle Motor, R8 Spindle Taper
* Programmable 50 to 5,000 rpm spindle speed
* Hardened & Groundwith turcite-B coating guide way
* Precision ballscrews for high accuracy and long lasting
* FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
* Anti rust chrome quill
* Moveable ram with cnc head stock
* 16” manual knee travel
* Box ways design on Y axis to provide maximum rigidity & stability
* Standard way covers on all three axes
* Tool box & Tools
* Precision APEC class7 spindle bearing to ensure spindle run out within 0.0002
* Auto lubrication system
* Built-in Quartz work light
* Hard limit switch
|
Specification:
Table: 10” x 50”
Longitudinal travel (X-axis): 31”
Cross travel: 14 1/2”
Z axis travel cnc quill: 4.5”
Knee travel (manual): 16”
Quill diameter: 3.375” (86 mm)
Spindle nose to table top (D): 0.75”-16.75” (20 – 426 mm)
Load capacity: 600 lb
Spindle taper: R8
Spindle Speed (r. p.m.): 70 to 5000 rpm with Hi/Lo gear
Transmission of spindle & motor: Timing Belt
Spindle center to column front surface: 6.875” to 23.50” (175-597 mm)
Motor:
Spindle motor/max torque: 3 HP (Std.) / 5 HP (Opt.)
KVA rating: 4 KVA, 15 amps
Coolant pump (optional) 1/8 Hp
Lubrication pump: Auto Lubrication
Power requirement: 4 KVA, 3 Phase 208-230 voltage
Length X Width X Height (LXWXH): 108”x 77” x 92”
Net Weight: 3,100 lbs. (1420 Kgs)
|
STANDARD ACCESSORIES:
|
|
|
Tools & box
|
Chip Tray
|
Shop floor programming/Conversational
|
|
Leveling bolts & plate
|
Coolant system
|
USB 2.0 Port
|
|
RS-232 Interface
|
Auto lube system
|
15” color LCD
|
|
Operation manual
|
Halogen work light
|
1GB solid state hard drive
|
|
Additional Accessories information:
|
|
|
Power requirement
|
4 KVA 3 phase 208 V/230 V max
|
|
Air requirement
|
With opt. power draw bar 90 - 100 psi
|
|
Type of oil for Way oil / pneumatic oil
|
Mobil Vactra #2 / Air tool oil
|
|
Coolant capacity
|
7 Gallons
|
