Double Column Machining Center MODEL: D2204
MACHINE FEATURES
* FANUC CONTROL SYSTEM 21i-MB
* 22HP Spindle Motor, BT50 Spindle Taper
* ATC 30 / 40 pcs (opt.)
* 4,500 rpm spindle speed with spindle oil cooler
* Roller linier guide way
* Double nut precision ball screws hardened & ground for high accuracy and long lasting
* FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
* 100% Laser tested for positioning accuracy & repeatability
* Telescopic steel way covers on all three axes
* Extend head
* Coolant System and air blast system & Tool box & Tools
* Central lubrication system
* Built-in Quartz work light
* 90° angle milling head (manual) (opt.)
* Rigid tapping(opt.)
Specification:
Table: 70” x 157” (1800 x 4000 mm)
Longitudinal travel (X-axis): 165” (4200 mm)
Cross travel: 86” (2200 mm)
Vertical travel: 39” (1000 mm)
Spindle nose to table top (D): 10”-49.2” (250-1,250 mm)
Load capacity: 30,800 lbs (14000 Kgs)
Spindle taper: BT50
Spindle Speed (r. p.m.): 60-4500 rpm
Transmission of spindle & motor: Belts
Spindle center to column front surface:
Distant between columns: 86” (2200mm)
T-Slot: 9*0.86”*7” (9~22*180mm)
Feed Rate:
Rapid feed rate: X/Y/Z: 472 ipm
Cutting feed rate: 1-393 ipm
Motor:
Spindle motor/max torque: 22/18.5KW/30min/continued
Feed motors on XYZ: 7/6/7 KW
Coolant pump
Lubrication pump:
Power requirement: 50 KVA, 3 Phase 208-230 voltage
Automatic Tool Changer [Option]
No. of tools: 30/40
Max. tool length: 13.7”(350mm)
Max. tool weight: 39 lb (18 Kg)
Length X Width X Height (LXWXH):
Net Weight: 103,485 lbs. (47000 Kgs)
|
STANDARD ACCESSORIES:
|
|
|
High pressure automatic lubrication system
|
Fully enclosed guarding
|
Screw type chip conveyor (on both side)
|
|
Chain type chip conveyor and chip tray
|
Coolant pump and water tank
|
Spindle coolant system
|
|
Z-axis oil pressure balance system
|
air blasting
|
Working lamp and Operation light
|
|
Automatic power off system
|
Electrical hand wheel
|
Precision inspect chart
|
|
RS-232 connector
|
Leveling screws and pads
|
Tool box, electric circuit diagram and manual
|
|
Additional Accessories information:
|
|
|
Power requirement
|
80 KVA, 3 Phase 208-230 voltage
|
|
Air requirement
|
90 - 100 psi
|
|
Type of oil for Way oil / oil chiller / pneumatic oil
|
Mobil Vactra #2 / Shell Tellus 32 / Air tool oil
|
|
Coolant capacity
|
|
