- 3 phase 220 / 440 V, 7.5 HP motor with 12 speed gear head
- Rigid, one piece thermally balance casting bed
- Meehanite casting to maintain long term accuracy
- One piece casting floor stand
- Gap bed
- Inch & metric thread
- Built-in coolant system
- For maximum performance, the spindle is supported by 3 precision taper roller bearings
- Hardened & ground bed, slide ways & gears to ensure the highest reliability
- 3520 lbs, heavy duty machine, helps to eliminate machining vibration & extends tools life
- Made in Taiwan
Specification | |
Swing over bed | 17" |
Swing over cross slide | 10 1/2"" |
Distance between centers | 42" |
Width of bed ways | 11.8" |
Height of center from leg bottom | 42 3/8" |
Top slide travel | 4 3/4" |
Swing over gap | 24" |
Spindle nose taper / tool | D1-6 |
Spindle | |
Spindle nose mounting | STD: D1-6 |
Spindle bore | 2 1/4" |
Range of spindle speeds | 35 to 2000 RPM (12 speeds) |
Motor | |
Spindle motor/max torque | 7.5 HP (5.5 kW) |
Coolant pump | 1/8 HP |
Tailstock | |
Tailstock quill diameter | 2 3/8" |
Tailstock quill taper | M.T #4 |
Tailstock quill travel | 6.69" |
Thread & Feed | |
Lead screw diameter & pitch | 1 1/8", 4 TPI |
Range of inch threads | 2 ~ 72 (44) |
Range of metric threads | 0.2 ~ 14 (39) |
Number of feeds | 36 steps |
Range of longitudinal feeds | 0.00137 ”~0.03858 in /rev |
Range of cross feeds | 0.00068 to 0.01929 in/rev |
Dimension & Weight | |
Length x width x height | 87" x 41" x 59" (packing) ; 114" x 39" x 55" (space required) |
Net weight | 3520 lbs |