- Centroid M400 control with 15” Touch Screen LCD
- 7.5 HP spindle motor, CAT40 spindle taper
- 4,200 rpm spindle speed
- Hardened & Ground with Turcite-B coating guide way
- Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% laser tested for positioning accuracy & repeatability
- Box ways design on Y & Z axis to provide maximum rigidity & stability
- Standard way covers on all three axes
- Tool box & tools
- Coolant system
- Central lubrication system
- Built-in Quartz work light
- Portable hand wheel
Specification
Table:··································································· 15.7” x 54” (400x1370mm)
Longitudinal travel:················································ 40” (1016 mm)
Cross travel:························································· 20” (510 mm)
Vertical travel:······················································· 22” (560 mm)
Spindle nose to table top (D):································· 4” to 23” (100-580 mm)
Load capacity:······················································ 1550 lbs (700kgs)
Spindle taper:························································ NT40
Spindle speed:······················································ 60 to 4200 rpm
Transmission of spindle & motor:··························· Belts
Spindle center to column front surface:··················· 21.7" (450 mm)Feed Rate
Rapid feed rate:····················································· X/Y/Z: 250 ipm AC
Cutting feed rate:··················································· 1 to 120 ipmMotor
Spindle motor/max torque:····································· 7.5 HP / 5.5 kW
Feed motors on XYZ:············································ 1 kW - AC
Coolant pump:······················································ 1/8 Hp
Lubrication pump:················································· 150W
Power requirement:················································ 15 KVA, 3 Phase 208V to 230V (Max)
Dimension & Weight
Length x Width x Height:········································ 115” x 78” x 96”
(2920x1980x2440mm)
Net weight:···························································· 6820 lbs (3100 Kgs) -
Standard Accessories
Tools & box
Leveling bolts & plate
RS-232 interface
Parts manual machine
15" color Touch Screen LCD
Splash guard
Auto lube system
Halogen work light
240 GB solid state hard drive
USB 2.0 port
Coolant system
Shop floor programming/Conversational
Electronic Operation Manual Centroid
Specification | |
Table | 15.7" x 54" |
Longitudinal travel (X-axis) | 40" |
Cross travel (Y-axis) | 20" |
Vertical travel (Z axis) | 22" |
Spindle nose to table top (D) | 4" to 26" |
Spindle center to column front surface | 21.7" |
Spindle taper | CAT40 |
Spindle speed | 60 to 4200 rpm |
Load capacity | 1550 lbs |
Transmission of spindle & motor | Belt |
Motor | |
Spindle motor/max torque | 7.5 HP / 5.5 kW |
Servo motors on XYZ | 1 kw - AC |
Coolant pump | 1/8 HP |
Lubrication pump | 150W |
Power requirement | 15 KVA, 3 Phase 208V to 230V (Max) |
Feed Rate | |
Rapid feed rate | X/Y/Z: 250 ipm AC |
Cutting feed rate | 1 - 120 ipm |
Dimension & Weight | |
Length x width x height | 115" x 78" x 96" |
Net weight | 6820 lbs |