Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Box Way Design on Y & Z axes.
Rapid UP/Down motor (Power Knee)
Mechanical Variable Speed Head 5HP spindle motor, NT40 spindle taper.
70-3,800rpm spindle speed with Hi/Lo Gears.
Electrical Cabinet with Arm Type Control Panel
Coolant system with Chip Pan
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in LED Work Light.
Auto lubrication system.
Specification | |
Table | 10" x 54" |
Longitudinal travel (X-axis) | 36" |
Cross travel (Y-axis) | 16" |
Knee travel (manual) | 18" |
Quill travel | 5.5" |
Quill diameter | 4.17" |
Spindle nose to table center | 1.96" to 17.95" |
Spindle taper | NT40 |
Spindle speed | 70 to 3800 RPM with Hi/LO Gears |
Load capacity | 770 Lbs |
T-slot | 0.62" x 2.55" |
Transmission of spindle & motor | Timing belt |
Head Swivel (left/right) | +_ 90 degree |
Head tile (front/back) | Not available |
Ram travel | 24" |
Motor | |
Spindle motor/max torque | 5HP |
Coolant pump | 1/8 Hp |
Lubrication pump | Auto Lubrication |
Power requirement | 7 KVA 3 Phase 208V - 230V ( Max.) |
Dimension & Weight | |
Air Requirement | With OPt. power draw bar 90 PSI |
Oil Way Requirement | Way Oil #2 ; Mobil Vectra #2 |
Floor space (L x W x H) | 110" X 100" X 89" |
Net weight | 3740 Lbs |