Model KL1640 set speed 30 RPM during gear change. Only low gear (cnc10t.m41) and high gear (cnc10t.43).
Model KL-21 set speed 30 RPM during gear change (Low gear -Med gear and High gear).
Model KL-30 set speed 20 RPM during gear change .Low gear (cnc10t.m41), Med gear (cnc10t.m42) and High gear (cnc10t.m43).
How to change speed RPM during gear change
F7 -Utility > F5 File Opt > Use arrow key high light [C : drive ],press enter >> High light [Cnc10t ] press enter >> use arrow key high light [ cnc10t.m41 ] and press F4 [ Edit ] . You will see edit the file cnc10t.m41, use arrow key to move down at [ b ] = 30rpm , and you can change [ b ] how many rpm depend on what type of machine ( look above ). After that ,hold key [ ALT ] and press key [ F ] , and then press [ S ] Save ,and press[ X ] exit .
Do the same at file cnc10t.m42 and cnc10t.m43.
