- Centroid T400i control with 15” LCD
- 10 HP Spindle Motor, D1-8, 3 3/8” through hole spindle
- Max 2,200 rpm spindle speed with auto shift 3 gear range
- Hardened & ground with Turcite-B coating guide way
- C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% Laser tested for positioning accuracy & repeatability
- Massive one piece casting construction for maximum cutting performance
- 14” wide bed ways design to provide maximum rigidity & stability
- Tool box & tools
- Fully enclosure with electrically interlocked
- Coolant system
- Central lubrication system
- Built-in Quartz work light
- Dual Hand Wheel for manual operation
| Specification | |
| Height of center | 15" |
| Swing over bed | 30" |
| Swing over cross slide | 16" |
| Distance between centers | 40" |
| Width of bed ways | 13.7" |
| Max. size cutting tool | 1" |
| Spindle | |
| Spindle nose mounting | D1-8 |
| Spindle bore | 3 3/8" |
| Taper of spindle bore | M.T.#7 (Sleeve M.T.#5) |
| Range of spindle speeds | L:27 to 124 rpm M:125 to 490 rpm H:491 to 2200 rpm |
| Longitudinal travel (Z-axis) | 31.5" |
| Cross slide travel (X-axis) | 11.6" |
| Rapid travel/ Cutting feed rate | 270 / 120 ipm |