- Fanuc Oi-MD control
- 24 tools Swing Arm ATC
- 20 HP Spindle Motor, BT40 or CAT40 Spindle Taper
- 6,000 rpm spindle speed
- Heavy duty 3 axes linear guide way
- Built in Hit 500 rotary table with 1 degree indexing<\li>
- Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% laser tested for positioning accuracy & repeatability
- Anti-flex Reinforced base & column to provide maximum rigidity & stability
- Telescopic steel way covers on all three axes
- Tool box & tools
- Coolant system and air blast system
- Central lubrication system
- Built-in Quartz work light
- Rigid tapping (opt)
Specification | |
Table | 19.6” x 36.1” |
Longitudinal travel (X-axis) | 33.8" |
Cross travel (Y-axis) | 24.6" |
Vertical travel (Z axis) | 28.3" |
Spindle nose to table top (D) | 4" to 32.3" |
Spindle nose to table center | 6.2" to 30.9" |
Spindle taper | BT40/CAT40 |
Spindle speed | 6000 rpm |
Load capacity | 880 lbs |
Transmission of spindle & motor | Belts |
Motor | |
Spindle motor/max torque | 20 HP |
Servo motors on XYZ | 2 kW |
Coolant pump | 0.6 HP |
Lubrication pump | 150 W |
Power requirement | 32 KVA, 3 Phase 208V to 230V (Max) |
Feed Rate | |
Rapid feed rate | X/Y:960 ipm Z:800 ipm |
Cutting feed rate | 1 - 400 ipm |
Automatic Tool Changer | |
No, of tools | 24 Arm type |
Max tool diameter | 3.14" |
Max tool weight | 15 lbs |
Dimension & Weight | |
Length x width x height | 110" x 116" x 107" |
Net weight | 13860 lbs |