- Centroid M400 control with 15” Touch Screen LCD
- 24 tools ATC arm type
- 25 HP spindle motor, BT50 / CAT50 spindle taper
- 8,000 rpm spindle speed with spindle oil cooler
- Hardened & Ground with Turcite-B coating guide way
- Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% laser tested for positioning accuracy & repeatability
- 4 Box ways design on Y axis to provide maximum rigidity & stability
- Telescopic steel way cover on three axes
- Tool box & tools
- Coolant system and air blast system
- Central lubrication system
- Built-in Quartz work light
- Rigid tapping
- Portable hand wheel
Specification | |
Table | 59.8" x 27.5" |
Longitudinal travel (X-axis) | 52" |
Cross travel (Y-axis) | 28" |
Vertical travel (Z axis) | 27.5" |
Spindle nose to table top (D) | 4.3"~31.8" |
Spindle center to column front surface | 29.7" |
Spindle taper | BT40 / CAT40 |
Spindle speed | 6000 rpm |
Load capacity | 3300 lbs |
T-slot | 0.7" x 5 x 5.7" |
Motor | |
Spindle motor/max torque | 25 HP |
Power requirement | 48 KVA |
Pneumatic tank requirement (min) | 5 ~ 8 (5) kg/cm^2 |
Coolant tank capacity | 63.4 gal (1 hp) |
Feed Rate | |
Rapid feed rate | X/Y/Z: 640/640/480 ipm |
Cutting feed rate | 300 ipm |
Automatic Tool Changer | |
No, of tools | Arm 24 |
Max tool diameter | Ø 4.1" |
Max tool length | 13.7" |
Max tool weight | 33 lbs |
Dimension & Weight | |
Length x width x height | 155" x 113" x 116" |
Net weight | 18700 lbs |