- Centroid M400 control with 15” LCD
- 24 tools Swing Arm ATC
- 25 HP Spindle Motor, BT50 or CAT50 Spindle Taper
- 4,500 rpm spindle speed
- Heavy duty 3 axes linear guide way
- Built in 700x700 rotary table with 1 degree indexing<\li>
- Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
- 100% laser tested for positioning accuracy & repeatability
- Anti-flex Reinforced base & column to provide maximum rigidity & stability
- Telescopic steel way covers on all three axes
- Tool box & tools
- Coolant system and air blast system
- Central lubrication system
- Built-in Quartz work light
- Rigid tapping
- Portable hand wheel
Specification | |
Table | 27.6” x 49.6” |
Longitudinal travel (X-axis) | 43.3" |
Cross travel (Y-axis) | 35.4" |
Vertical travel (Z axis) | 27.6" |
Spindle nose to table top (D) | 4.6" to 32.3" |
Spindle nose to table center | 7.8" to 43.3" |
Spindle taper | BT50/CAT50 |
Spindle speed | 4500 rpm |
Load capacity | 1320 lbs |
Transmission of spindle & motor | Belts |
Motor | |
Spindle motor/max torque | 25 HP / 20 kW |
Servo motors on XYZ | 3 kW - AC |
Coolant pump | 0.6 HP |
Lubrication pump | 150 W |
Power requirement | 40 KVA, 3 Phase 208V to 230V (Max) |
Feed Rate | |
Rapid feed rate | X/Z:700 ipm Y:400 ipm |
Cutting feed rate | 1 - 360 ipm |
Automatic Tool Changer | |
No, of tools | 24 Arm type |
Max tool diameter | 3.5" |
Max tool weight | 30 lbs |
Dimension & Weight | |
Length x width x height | 110" x 135" x 112" |
Net weight | 14080 lbs |