• KV4


  • Model: Manual Knee Mill
  • Availability: Pre-Order

Meehanite castings mainframe with annealed relieved for long term reliability.

X Y Z Hardened & ground with Turcite-B coating guide way

Box Way Design on Y & Z axes.

Rapid UP/Down motor (Power Knee)

Mechanical Variable Speed Head 5HP spindle motor, NT40 spindle taper.

70-3,800rpm spindle speed with Hi/Lo Gears.

Electrical Cabinet with Arm Type Control Panel

Coolant system with Chip Pan

Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.

C7 double nut precision acme lead screws for high accuracy and long lasting.

Chip rubber cover (Front & rear).

Built in LED Work Light.

Auto lubrication system.

Table 10" x 54"
Longitudinal travel (X-axis) 36"
Cross travel (Y-axis) 16"
Knee travel (manual) 18"
Quill travel 5.5"
Quill diameter 4.17"
Spindle nose to table center 1.96" to 17.95"
Spindle taper NT40
Spindle speed 70 to 3800 RPM with Hi/LO Gears
Load capacity 770 Lbs
T-slot 0.62" x 2.55"
Transmission of spindle & motor Timing belt
Head Swivel (left/right) +_ 90 degree
Head tile (front/back) Not available
Ram travel 24"
Spindle motor/max torque 5HP
Coolant pump 1/8 Hp
Lubrication pump Auto Lubrication
Power requirement 7 KVA 3 Phase 208V - 230V ( Max.)
Dimension & Weight
Air Requirement With OPt. power draw bar 90 PSI
Oil Way Requirement Way Oil #2 ; Mobil Vectra #2
Floor space (L x W x H) 110" X 100" X 89"
Net weight 3740 Lbs

Atrump Machinery, Inc.