Specification | |
Table | 16.5″ x 63″ |
Longitudinal travel (X-axis) | 51″ |
Cross travel (Y-axis) | 24.5″ |
Vertical travel (Z axis) | 24″ |
Spindle nose to table top (D) | 5″ to 30″ |
Spindle center to column front surface | 25.5″ |
Spindle taper | CAT40 or NMTB40 |
Spindle speed | 60 to 8000 rpm |
Load capacity | 2000 lbs |
Transmission of spindle & motor | Belt |
Motor | |
Spindle motor/max torque | 10 HP / 7.5 kW |
Servo motors on XYZ | 2 kw – AC |
Coolant pump | 1/8 HP |
Lubrication pump | 150W |
Power requirement | 15 KVA, 3 Phase 208V to 230V (Max) |
Feed Rate | |
Rapid feed rate | X/Y/Z: 250 ipm AC |
Cutting feed rate | 1 – 120 ipm |
Automatic Tool Changer | |
No, of tools | OPT |
Max tool diameter | 3.5″ |
Max tool weight | 15 lbs |
Dimension & Weight | |
Length x width x height | 165″ x 84″ x 105″ |
Net weight | 8360 lbs |
Powered by E Century