Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Mechanical Variable Speed Head 3HP spindle motor, R8 / NT30 spindle taper.
70-4,200rpm spindle speed with Hi/Lo Gears.
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in Halogen Work Light.
One shot lubrication system.
Specification | |
Table | 9″ x 49″ |
Longitudinal travel (X-axis) | 30″ |
Cross travel (Y-axis) | 12″ |
Knee travel (manual) | 16″ |
Quill travel | 5″ |
Quill diameter | 3.38″ |
Spindle nose to table top (D) | 1.96″ to 17.9″ |
Spindle taper | R8 / NT30 |
Spindle speed | 70 to 4200 rpm with Hi/ Lo gears |
Load capacity | 660 LBS |
T-slot | 0.62″ x 2.55″ |
Transmission of spindle & motor | Timing belt |
Head Swivel (left/right) | + / – 90 degree |
Head tile (front/back) | + / – 45 degree |
Ram travel | 12″ |
Motor | |
Spindle motor/max torque | 3 HP |
Coolant pump | 1/8 Hp |
Lubrication pump | One Shot |
Power requirement | 4 KVA – 3 phase -208 V – 230V ( Max) |
Dimension & Weight | |
Air Requirement | With Optional power draw bar 90 – 100 psi |
Oil Way Requirement | Mobil Vectra #2 ; Way oil #2 |
Floor space (L x W x H) | 64″ x 75″ x 85″ |
Net weight | 2420 Lbs |
Powered by E Century