Electronic Vari- Speed Head
Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Electronic Vari-Speed Head 3HP spindle motor, R8 / NT30 spindle taper.
Digital output 70-5000rpm spindle speed with Hi/Lo Gears.
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in Halogen Work Light.
One shot lubrication system.
Easy Tap Function.
Specification | |
Table | 10" x 54" |
Longitudinal travel (X-axis) | 36" |
Cross travel (Y-axis) | 15.75" |
Knee travel (manual) | 16" |
Quill travel | 5" |
Quill diameter | 3.38" |
Spindle nose to table top (D) | 1.96" to 17.9" |
Spindle taper | R8 / NT30 |
Spindle speed | 70 to 5000 rpm with ( Low / Hi Gears ) |
Load capacity | 770 Lbs |
T-slot | 0.62" x 2.55" |
Transmission of spindle & motor | Timing belt |
Head Swivel (left/right) | +90 / -90 Degree |
Head tile (front/back) | +45 / -45 Degree |
Ram travel | 24" |
Motor | |
Spindle motor/max torque | 3 Hp |
Coolant pump | 1/8 Hp |
Lubrication pump | One Shot |
Power requirement | 4KVA 3 Phase 208V - 230V ( max ) |
Dimension & Weight | |
Air Requirement | With Optional power draw bar 90-100psi |
Oil Way Requirement | Mobile Vectra #2 / Way oil #2 |
Floor space (L x W x H) | 110" x 100" x 89" |
Net weight | 3080 Lbs |