- D1-4" (1 9/16") spindle bore
- Inverter drive
- Variable spindle speeds: 2 steps Hi & Lo
- Swing over bed: 14"
- Swing over cross slide: 8 3/4"
- Cross slide travel: 7";
- Bed length-longitudinal travel: 40"
- Spindle horsepower: 5 HP
- Hardened and ground bed ways
- Hardened and ground gears in headstock
- Rapid foot break
- Precision taper rollers bearing
- Feed rod is equipped w/ over load safety clutch
- Apron is equipped with an interlocking device to prevent feeding inter-grearing during automatic feeding and the half-nut operation
| Specification | |
| Swing over bed | 14" |
| Swing over cross slide | 8 3/4" |
| Distance between centers | 40" |
| Width of bed ways | 9" |
| Swing over saddle | 20 3/4" |
| Cross slide travel | 7" |
| Compound rest travel | 3 3/4" |
| Center high | 7" |
| Bed length | 65" |
| Spindle nose taper / tool | Outer M.T.#5, Inner M.T.#3 |
| Spindle | |
| Spindle nose mounting | STD: D1-4 |
| Spindle bore | 1 9/16" |
| Range of spindle speeds | L: 36-300 rpm H: 30~2200 |
| Motor | |
| Spindle motor/max torque | 5 HP |
| Coolant pump | 1/8 HP |
| Tailstock | |
| Tailstock quill taper | M.T #3 |
| Tailstock quill travel | 4" |
| Thread & Feed | |
| Lead screw diameter & pitch | 15/16" & 0.16" |
| Range of inch threads | 4~56 T.P.I (32 kinds) |
| Range of metric threads | 0.4~7.0 (32 kinds) |
| Range of longitudinal feeds | 0.0026”~0.0368” /rev |
| Dimension & Weight | |
| Length x width x height | floor: 68" x 30"; packing: 75" x 32" x 63" |
| Net weight | 1584 lbs; gross weight: 1804 lbs |