- D1-4" (1 9/16”) spindle bore
- Spindle Speeds: 80-2,000 RPM (9 speed)
- Swing over bed: 14” (360 mm)
- Swing over cross slide: 8 3/4” (225 mm)
- Cross slide travel: 6 1/2" (175 mm)
- Bed length-longitudinal travel: 40" (1000 mm)
- Spindle horsepower: 3 HP
- Hardened and ground bed ways
- Hardened and ground gears in headstock
- Rapid foot break
- Precision taper rollers bearing
- Feed rod is equipped w/ over load safety clutch
- Apron is equipped with an interlocking device to prevent feeding inter-grearing during automatic feeding and the half-nut operation
| Specification | |
| Swing over bed | 14" |
| Swing over cross slide | 8 3/4" |
| Distance between centers | 40" |
| Width of bed ways | 7 9/16" |
| Swing over saddle | 20 3/4" |
| Top slide travel | 4" |
| Cross slide travel | 6 1/2" |
| Spindle nose taper / tool | Outer M.T.#5, Inner M.T.#3 |
| Spindle | |
| Spindle nose mounting | STD: D1-4 |
| Spindle bore | 1 1/2" |
| Range of spindle speeds | 80 to 2000 RPM (9 speeds) |
| Motor | |
| Spindle motor/max torque | 3 HP (2.2 kW) |
| Coolant pump | 1/8 HP |
| Tailstock | |
| Tailstock quill taper | M.T #3 |
| Tailstock quill travel | 4" |
| Thread & Feed | |
| Range of inch threads | 4~56 T.P.I (32 kinds) |
| Range of metric threads | 0.4~7.0 (32 kinds) |
| Range of longitudinal feeds | 0.0026”~0.0638” /rev |
| Range of cross feeds | 0.0013”~0.03919” /rev |
| Dimension & Weight | |
| Length x width x height | 73" x 30" x 58" (Packing dimension) |
| Net weight | 1367 lbs (620 Kgs) |