KV2
- Model: Manual Knee Mill
- Availability: Pre-Order
Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Mechanical Variable Speed Head 3HP spindle motor, R8 / NT30 spindle taper.
70-4,200rpm spindle speed with Hi/Lo Gears.
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in Halogen Work Light.
One shot lubrication system.
| Specification | |
| Table | 9" x 49" |
| Longitudinal travel (X-axis) | 30" |
| Cross travel (Y-axis) | 12" |
| Knee travel (manual) | 16" |
| Quill travel | 5" |
| Quill diameter | 3.38" |
| Spindle nose to table top (D) | 1.96" to 17.9" |
| Spindle taper | R8 / NT30 |
| Spindle speed | 70 to 4200 rpm with Hi/ Lo gears |
| Load capacity | 660 LBS |
| T-slot | 0.62" x 2.55" |
| Transmission of spindle & motor | Timing belt |
| Head Swivel (left/right) | + / - 90 degree |
| Head tile (front/back) | + / - 45 degree |
| Ram travel | 12" |
| Motor | |
| Spindle motor/max torque | 3 HP |
| Coolant pump | 1/8 Hp |
| Lubrication pump | One Shot |
| Power requirement | 4 KVA - 3 phase -208 V - 230V ( Max) |
| Dimension & Weight | |
| Air Requirement | With Optional power draw bar 90 - 100 psi |
| Oil Way Requirement | Mobil Vectra #2 ; Way oil #2 |
| Floor space (L x W x H) | 64" x 75" x 85" |
| Net weight | 2420 Lbs |