• KV5


  • Model: Manual Knee Mill
  • Availability: Pre-Order

Atrump Machinery has always offered Highest Quality Standards.

Meehanite castings, Box Way design on the Y & Z axes.

Rapid Up & Down motor.

Electrical Box with Arm type control Panel

X Y Z Hardened & ground with Turcite-B coating guide way

Mechanical Variable Speed Head 70-3800rpm with Hi/Lo Gears.

Front steel way cover and Rear chip rubber cover.

Built in LED Work Light

Auto lubrication system.

Coolant system with chip pan

Precision P5 class spindle bearing to ensure spindle run out within 0.0002inch.

Table 12" X 60"
Longitudinal travel (X-axis) 39.4"
Cross travel (Y-axis) 16"
Knee travel (manual) 18"
Quill travel 5.5"
Quill diameter 4.17" ( 106 mm)
Spindle nose to table top (D) 1.96" to 21.25"
Spindle taper NT40
Spindle speed 70 to 3800 RPM with Hi/ Lo gears
Load capacity 1,100 Lbs
T-slot 0.71" x 2.5"
Transmission of spindle & motor Timing belt
Head Swivel (left/right) +/- 90 degrees
Head tile (front/back) None
Ram travel 24"
Spindle motor/max torque 5HP
Coolant pump 1/8 Hp
Lubrication pump Auto Lubrication
Power requirement 7 KVA 3 phase 208V - 230V ( Max.)
Dimension & Weight
Air Requirement With Opt. power draw bar 90 PSI
Oil Way Requirement Way Oil # 2 ; Mobil Vectra #2
Floor space (L x W x H) 125" x 79.4" x 92.13"
Net weight 4400 Lbs

Atrump Machinery, Inc.