| Specification | |
| Table | 27.6” x 49.6” |
| Longitudinal travel (X-axis) | 43.3″ |
| Cross travel (Y-axis) | 35.4″ |
| Vertical travel (Z axis) | 27.6″ |
| Spindle nose to table top (D) | 4.6″ to 32.3″ |
| Spindle nose to table center | 7.8″ to 43.3″ |
| Spindle taper | BT50/CAT50 |
| Spindle speed | 4500 rpm |
| Load capacity | 1320 lbs |
| Transmission of spindle & motor | Belts |
| Motor | |
| Spindle motor/max torque | 25 HP / 20 kW |
| Servo motors on XYZ | 3 kW – AC |
| Coolant pump | 0.6 HP |
| Lubrication pump | 150 W |
| Power requirement | 40 KVA, 3 Phase 208V to 230V (Max) |
| Feed Rate | |
| Rapid feed rate | X/Z:700 ipm Y:400 ipm |
| Cutting feed rate | 1 – 360 ipm |
| Automatic Tool Changer | |
| No, of tools | 24 Arm type |
| Max tool diameter | 3.5″ |
| Max tool weight | 30 lbs |
| Dimension & Weight | |
| Length x width x height | 110″ x 135″ x 112″ |
| Net weight | 14080 lbs |