Electronic Vari- Speed Head
Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Electronic Vari-Speed Head 3HP spindle motor, R8 / NT30 spindle taper.
Digital output 70-5000rpm spindle speed with Hi/Lo Gears.
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in Halogen Work Light.
One shot lubrication system.
Easy Tap Function.
| Specification | |
| Table | 9″ x 49″ |
| Longitudinal travel (X-axis) | 30″ |
| Cross travel (Y-axis) | 12″ |
| Knee travel (manual) | 16″ |
| Quill travel | 5″ |
| Quill diameter | 3.38″ |
| Spindle nose to table top (D) | 1.96″ to 17.9″ |
| Spindle taper | R8 / NT30 |
| Spindle speed | 70 to 5000 pm ( Lo / Hi gears ) |
| Load capacity | 660 Lbs |
| Transmission of spindle & motor | Timing belt |
| Head Swivel (left/right) | +90 / -90 Degree |
| Head tile (front/back) | +45 / – 45 Degree |
| Motor | |
| Spindle motor/max torque | 3 Hp |
| Coolant pump | 1/8 Hp |
| Lubrication pump | One Shot |
| Power requirement | 4 KVA 3 Phase 208 – 230 V (max ) |
| Dimension & Weight | |
| Air Requirement | With Optional . power draw bar 90-100 psi |
| Oil Way Requirement | Mobil Vectra #2 / Way Oil # 2 |
| Floor space (L x W x H) | 64″ x 75″ x 85″ |
| Net weight | 2640 Lbs |
Powered by Skynet Websites