Atrump Machinery has always offered Highest Quality Standards.
Meehanite castings, Box Way design on the Y & Z axes.
Rapid Up & Down motor.
Electrical Box with Arm type control Panel
X Y Z Hardened & ground with Turcite-B coating guide way
Mechanical Variable Speed Head 70-3800rpm with Hi/Lo Gears.
Front steel way cover and Rear chip rubber cover.
Built in LED Work Light
Auto lubrication system.
Coolant system with chip pan
Precision P5 class spindle bearing to ensure spindle run out within 0.0002inch.
| Specification | |
| Table | 12″ X 60″ |
| Longitudinal travel (X-axis) | 39.4″ |
| Cross travel (Y-axis) | 16″ |
| Knee travel (manual) | 18″ |
| Quill travel | 5.5″ |
| Quill diameter | 4.17″ ( 106 mm) |
| Spindle nose to table top (D) | 1.96″ to 21.25″ |
| Spindle taper | NT40 |
| Spindle speed | 70 to 3800 RPM with Hi/ Lo gears |
| Load capacity | 1,100 Lbs |
| T-slot | 0.71″ x 2.5″ |
| Transmission of spindle & motor | Timing belt |
| Head Swivel (left/right) | +/- 90 degrees |
| Head tile (front/back) | None |
| Ram travel | 24″ |
| Motor | |
| Spindle motor/max torque | 5HP |
| Coolant pump | 1/8 Hp |
| Lubrication pump | Auto Lubrication |
| Power requirement | 7 KVA 3 phase 208V – 230V ( Max.) |
| Dimension & Weight | |
| Air Requirement | With Opt. power draw bar 90 PSI |
| Oil Way Requirement | Way Oil # 2 ; Mobil Vectra #2 |
| Floor space (L x W x H) | 125″ x 79.4″ x 92.13″ |
| Net weight | 4400 Lbs |
Powered by Skynet Websites