| Specification | |
| Table | 10″ x 54″ (254 mm x 1375 mm ) |
| Longitudinal travel (X-axis) | 35 ” (900 mm ) |
| Cross travel (Y-axis) | 15″ (381 mm ) |
| Vertical travel (Z axis) | 22″ (560 mm) |
| Saddle size | 24″ (610 mm) |
| Quill travel | 5″ (127 mm) |
| Quill diameter | 3.93″ (100 mm) |
| Spindle center to column front surface | 21.5″ (546 mm) |
| Spindle nose to table center | 3.93″ to 25.98″ ( 100 -660 mm) |
| Load capacity | 1,100 Lbs ( 500 Kgs) |
| T-slot | 0.62 ” x 2.55″ |
| Transmission of spindle & motor | Timing belt |
| Head Swivel (left/right) | 90 / 90 degrees |
| Spindle nose taper / tool | NT40 |
| Spindle | |
| Range of spindle speeds | 70 to 4500 rpm with Hi / Lo Gears |
| Motor | |
| Spindle motor/max torque | 5 Hp |
| Servo motors on XYZ | Ac motor – 1 Kw -X / Y / Z |
| Coolant pump | 1/8 Hp |
| Lubrication pump | Auto Lubrication |
| Power requirement | 10KVA – 3 Phase 208V ~ 230 V ( Max) |
| Coolant tank capacity | 7 Gallons |
| Feed Rate | |
| Rapid feed rate | X/Y/Z – 240 Ipm -AC |
| Cutting feed rate | 1 to 120 Ipm |
| Dimension & Weight | |
| Air Requirement | 70 – 100 PSI power Draw bar |
| Oil Way Requirement | Way Oil #2 ; Mobil Vectra #2 |
| Shipping dimension (L x W x H) | 111.14″ x 69.05″ X 94.2 “ |