EL32

• Centroid M400 control with 15″ LCD – Touch SCreen
• 10 HP spindle motor, CAT40 / BT40 spindle taper
• 8,000 rpm spindle speed
• Linear guide way Roller Type on three axes
• C3 class ball screw is pre-loaded to reduce the effects of heat deformation
• LED work light  1 piece standard
• Double nut precision ball screws hardened & ground for high accuracy and long lasting
• FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
• 100% laser tested for positioning accuracy & repeatability
• Telescopic steel way covers on all three axes
• Tool box & Tools
• Coolant system and air blast system
• Central lubrication system
• Rigid tapping 
•   Portable hand wheel 

Specification

                X / Y / Z travel:······················································ 31.5″/20.5″/21.6″                      
                Distance from spindle to table top:························· 3.9″ ~ 25.6″ (100 ~ 650mm)

Working Table                                                                      

                Size (X / Y):·························································· 25.4″/17.7″ (900mm/450mm)
                T-slot:··································································· 0.7″ x 5 x 3.14″ (18mm x 5 x 80mm)                                                                                
                Load capacity:······················································ 990 lbs (450 kgs)

Spindle

                Motor:·································································· 10HP/15HP(30min)
                Speed:································································· 8,000 rpm
                Taper:··································································· CAT40 / BT40

Feed Rate

                Rapid X / Y / Z:····················································· 1000 /1000 /800 ipm (25 /25 /20 M/min)
                Cutting:································································· 393 ipm (10 M/min)

ATC

                Tool magazine capacity:········································ Armless 16 tool
                Max. tool dia. / adj. pocket empty:·························· Ø 3.1″ / Ø 3.54″
                Max. tool length:··················································· 11.8″
                Max. tool weight:··················································· 15.4lbs (Total≦176lbs)

General

                Power requirement:················································ 17 KVA
                Pneumatic tank requirement (min.):························ 5 ~ 8 (5) kg/cm^2
                Coolant tank capacity (pump):································ 75.2 gal (2 hp)

Dimension & Weight

                L X W X H:···························································· 97.2″ x 86.6″ x 88.9″
                Weight:································································· 9,240 lbs