Meehanite castings mainframe with annealed relieved for long term reliability.
X Y Z Hardened & ground with Turcite-B coating guide way
Box Way Design on Y & Z axes.
Rapid UP/Down motor (Power Knee)
Mechanical Variable Speed Head 5HP spindle motor, NT40 spindle taper.
70-3,800rpm spindle speed with Hi/Lo Gears.
Electrical Cabinet with Arm Type Control Panel
Coolant system with Chip Pan
Precision APEC class 7 spindle bearing to ensure spindle run out within 0.0002inch.
C7 double nut precision acme lead screws for high accuracy and long lasting.
Chip rubber cover (Front & rear).
Built in LED Work Light.
One shot lubrication system.
| Specification | |
| Table | 10″ x 54″ |
| Longitudinal travel (X-axis) | 36″ |
| Cross travel (Y-axis) | 16″ |
| Knee travel (manual) | 18″ |
| Quill travel | 5.5″ |
| Quill diameter | 4.17″ |
| Spindle nose to table center | 1.96″ to 17.95″ |
| Spindle taper | NT40 |
| Spindle speed | 70 to 3800 RPM with Hi/LO Gears |
| Load capacity | 770 Lbs |
| T-slot | 0.62″ x 2.55″ |
| Transmission of spindle & motor | Timing belt |
| Head Swivel (left/right) | +_ 90 degree |
| Head tile (front/back) | Not available |
| Ram travel | 24″ |
| Motor | |
| Spindle motor/max torque | 5HP |
| Coolant pump | 1/8 Hp |
| Lubrication pump | Auto Lubrication |
| Power requirement | 7 KVA 3 Phase 208V – 230V ( Max.) |
| Dimension & Weight | |
| Air Requirement | With OPt. power draw bar 90 PSI |
| Oil Way Requirement | Way Oil #2 ; Mobil Vectra #2 |
| Floor space (L x W x H) | 110″ X 100″ X 89″ |
| Net weight | 3740 Lbs |