Specification | |
Swing over bed | 14″ |
Swing over cross slide | 8 3/4″ |
Distance between centers | 40″ |
Width of bed ways | 9″ |
Swing over saddle | 20 3/4″ |
Cross slide travel | 7″ |
Compound rest travel | 3 3/4″ |
Center high | 7″ |
Bed length | 65″ |
Spindle nose taper / tool | Outer M.T.#5, Inner M.T.#3 |
Spindle | |
Spindle nose mounting | STD: D1-4 |
Spindle bore | 1 9/16″ |
Range of spindle speeds | L: 36-300 rpm H: 30~2200 |
Motor | |
Spindle motor/max torque | 5 HP |
Coolant pump | 1/8 HP |
Tailstock | |
Tailstock quill taper | M.T #3 |
Tailstock quill travel | 4″ |
Thread & Feed | |
Lead screw diameter & pitch | 15/16″ & 0.16″ |
Range of inch threads | 4~56 T.P.I (32 kinds) |
Range of metric threads | 0.4~7.0 (32 kinds) |
Range of longitudinal feeds | 0.0026”~0.0368” /rev |
Dimension & Weight | |
Length x width x height | floor: 68″ x 30″; packing: 75″ x 32″ x 63″ |
Net weight | 1584 lbs; gross weight: 1804 lbs |
Powered by E Century